lutron sensors

Home > sensor > lutron sensors

February 11th, 2010 admin Leave a comment Go to comments

It may seem strange to use home automation system for energy savings - after all, not the control system itself energy? Certainly minimalist approach to the electrical hardware best way to save energy?

Well designed home automation system can provide huge benefits and savings in energy consumption:

Management Lighting

Lighting control systems can save considerable amounts of energy. Dimming mechanism can save up to 70% of energy non-dim light, which, in combination with active detection and exploration of daylight can save enormous amounts of energy. Simply put, home automation system determines whether the room is occupied, and if it is, whether the current light level is sufficient. Large companies have been using this technology for years, and the huge savings, and now the likes of Crestron begin to release the keyboard lights with light sensors built in to the domestic market.

Heating Controls

There are many ways home automation system can save on your heating costs home - individual thermostats in each room of the house is never provided to allow the heated temperature is reduced when room is vacant. Such temperature reductions can even be tied into your security system to set the alarm when you leave property will reduce the required temperature, saving even a few degrees can bring substantial savings. Individual controls different rooms can allow different temperatures throughout the home, similar to a radiator temperature options are all used but with a much more reliable. Home automation system also comes with its renewable energy - biomass boilers and stoves can be controlled to ensure maximum efficiency. Incidentally, it is also worth considering comfort - Imagine that you have to ski cottage on the last day to go running on the stove - providing a welcome room, when the heat you home!

Intelligent Power Switching

Switching things are required if an easy way to save energy. Modern device was designed to use much less energy in standby which is the reason why our management systems are programmed to switch equipment off when not needed. With some devices - which we know to be effective even when standby mode - we can automatically turn off all power to the device. Our modern multi-room amplifiers are Class D models This means that each output has its own power supply, and therefore only part of the amplifiers are turned on at once.

Heating, ventilation and air conditioning

Although we are already the subject of heating control is important think of heat as part of a larger picture. Modern buildings often contain a lot of glass, which can cause temperature variations - too cold part time or too hot when the sun streams through the windows. Same Crestron heating thermostats You can let us know when the temperature rises, and with the keyboard illumination light sensors, whether the blinds be closed. The pre-preventive measures can save huge amounts of air conditioning costs while protecting the structure of the room. Security can be enhanced by the closure of the curtains or blinds when darkness falls. Climate control is not only to make the system easier to use, but that is the only operating system if the room is occupied and the conditions require.